Skip to content

Python 3 Installation

INSTALLING PYTHON

Windows Users

You must use Python 3.7 or greater.

To install Python 3, go to the Python home page, and download the latest Python 3 distribution for your operating system.

If there is a checkbox to add Python 3.x to your path during the installation process, make sure it is checked before proceeding with the installation.

Linux Users

Python 3.7.2 or greater is required.

Raspberry Pi Raspbian Users

If your copy of Raspbian is using Python 3.7 or greater, you should be all set to proceed.

Ubuntu and Other Debian Based Linux Distributions

You may need to install pip3. To check, open a terminal and type:

which pip3

If a path to pip3 is not reported, you will need to install it.

Open a terminal window and type:

  sudo apt-get install pip3-python

You should then make sure you have the latest version by typing:

sudo pip3 install -U pip

For All Other Linux Distributions

Refer to your distribution's instructions.

Mac Users

Python 3.7.2 or greater is required.

  1. Install Python 3.7.x from https://www.python.org/downloads/ or via homebrew
  2. Download get-pip.py from https://bootstrap.pypa.io/get-pip.py and install (this should already be installed if Python was installed from python.org or homebrew):
curl -O https://bootstrap.pypa.io/get-pip.py
sudo python3 get-pip.py

Verify The Python Installation

Use the procedure shown here to verify that you have successfully installed the correct version of Python for your computer.