Skip to content

Server Configuration

Arduino UNO R4 Minima

The Minima requires no configuration.

Arduino UNO R4 WIFI

Telemetrix4UnoR4BLE

Starting Banner Enable

By default, when you power up the Arduino, the sketch is identified by the message "Telemetrix BLE" scrolling across the display. This message will be extinguished once a client application connects.

You may disable the power on scrolling by commenting out the line that says

#define ENABLE_STARTING_BANNER 1

The client API method, enable_scroll_message, which allows you to create and scroll your own message across the display, still functions even if you disable the starting banner.

BLE Name

The ble_name string is the name the BLE client will search for to connect. You may change the default value, but if you do, you must also set the ble_device_name parameter in the __init__ method when you instantiate telemetrix_uno_r4_wifi_aio.

Telemetrix4UnoR4SerialUSB

Starting Banner Enable

By default, when you power up the Arduino, the sketch is identified by the message "USBSerial" scrolling across the display. This message will be extinguished once a client application connects.

You may disable the power on scrolling by commenting out the line that says

#define ENABLE_STARTING_BANNER 1

The client API method, enable_scroll_message, allows you to create and scroll your own message across the display, and it still functions even if you disable the starting banner.

Telemetrix4UnoR4Wifi

Required Configuration

SSID

Edit the sketch and place your router's SSID between the quotes.

PASSWORD

Edit the sketch and place your router's PASSWORD between the quotes.

Starting Banner Enable

If the starting banner is enabled, and you forget to set SSID and PASSWORD in the sketch, a series of question marks will scroll across the screen.

Once you have a valid SSID and PASSWORD configured, the IP address assigned by the router will be displayed.

You may disable the power on scrolling by commenting out the line that says

#define ENABLE_STARTING_BANNER 1

The client API method, enable_scroll_message, allows you to create and scroll your own message across the display, and it still functions even if you disable the starting banner.