Callbacks

Registering A Callback

A callback function must be registered when you set a pin to an input mode.

The code below illustrates a typical callback function.

def the_callback(data):
    """
    A callback function to report data changes.
    This will print the pin number, its reported value and
    the date and time when the change occurred

    :param data: [pin mode, pin, current reported value,timestamp]
    """
    date = time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(data[CB_TIME]))
    print(f'Report Type: {data[CB_PIN_MODE]} Pin: {data[CB_PIN]} '
          f'Value: {data[CB_VALUE]} Time Stamp: {date}')

And here, the callback is registered when the set_pin_mode is called:

board.set_pin_mode_digital_input_pullup(12, the_callback)

If you forget to register a callback, a RunTime exception will be thrown.

Traceback (most recent call last):
  File "/home/afy/PycharmProjects/telemetrix-rpi-pico-w/ play/no_callback_registered.py", line 5, in <module>
    board.set_pin_mode_digital_input(5)
  File "/home/afy/PycharmProjects/telemetrix-rpi-pico-w/telemetrix_rpi_pico_w/telemetrix_rpi_pico_w.py", line 752, in set_pin_mode_digital_input
    raise RuntimeError('A callback must be specified')
RuntimeError: A callback must be specified

Callback Function Parameter

A callback function or method must accept a single parameter. The client automatically fills in this parameter as a list when receiving an input data change notification.
For "the_callback" above, this parameter is named data.

The list contents vary from input pin type to input pin type and are described in detail for each set_pin_mode_XXX method in the API documentation. The first element in the list identifies the pin type, and the last element is a timestamp of the data change occurrence. Other elements identify the GPIO pin, the current data value, and additional relevant information.

For example, the list may contain

[DIGITAL_REPORT, pin_number, pin_value, raw_time_stamp]

DIGITAL_REPORT = 2

NOTE:

**Telemetrix does not support polling or direct read methods for inputs. Instead, the pin's associated callback is called as soon as a data change is detected, allowing immediate response to data changes and, generally, a more straightforward application design. **

Pin Types

Pin Mode	Pin Mode Value
Digital Input (including pullup and pulldown)	2
Analog Input (ADC)	3
I2C	10
SONAR Distance	11
DHT	12

Converting The Raw Timestamp

To convert the raw timestamp field to a human-readable time, use time.localtime().

date = time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(data[CB_TIME]))